DuraPro: White Glue Technical details

PRODUCT DESCRIPTION
DURA PRO AW 2461 is a synthetic resin based adhesive designed for general wood assembly, wood lamination and edge
glueing.

PRODUCT FEATURES
• Strength 3000 lbs
• VOC compliant

PREPARATION
Mix well before using. Adhesive, material and room tem- perature should be above 20°C. All surfaces to be glued must be
clean and dry. Best bonds are obtained when moisture content
of wood ranges between 8% and 12%.

APPLICATION
Apply directly from the plastic bottle or using a stiff brush or a
mechanical glue spreader. Spread glue to result in squeeze out
when parts are assembled. Joints must be tight fitting. Clamp
or press using sufficient pressure. When glue becomes colorless, a full strength bond has been formed. Allow to dry before
sanding.

GUIDELINES (AT 20°C & 50% RH)
Assembly time: 15-20 minutes
Clamp time: 50-60 minutes
Drying time: 4-6 hours
Spread rate: approx. 6 sq. m. / L

CLEAN UP
Clean hans and tools with warm soapy water before the
product dries. If the glue has hardened, use a 50% solution of
acetone and water for cleaning. On bonded materials, scrape
off and sand dry excess.

STORAGE
Shelf life is 1 year at room temperature in original unopened
container. Product is freeze/thaw stable if frozen not lower
than -10°C.

PRECAUTIONS
This product is not classified dangerous according to the Consumer Chemicals and Containers Regulations (CCCR). Not a
regulated product according to Workplace Hazardous Materials Information System (WHMIS). Refer to the material safety
data sheet (MSDS) for further information.

source:
Find product from ERoko: 4 L WHITE DURAL AW2461 , 20 L WHITE DURAL AW2461